 |
|
|
|
|
|
| |
| |
|
|
|
|
| |
| |
|
|
http://pyvon.sourceforge.net
I have fixed all the bugs that I know of.
There may be a few left. -> I called that release 0.9.
It's going to give me some margin before 1.0 if you can find any bugs.
Main features added :
- Highlights the line in the editor in which there is a problem when POV
returns an error.
- Full syntax highlighting is now implemented (even multiline and single
comments)
- Fixed about thirty bugs which were still lying around.
It's now the only editor I use for POV with Linux.
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
<posted & mailed>
Fabien wrote:
> http://pyvon.sourceforge.net
>
> I have fixed all the bugs that I know of.
>
[SNIP]
I got this error (below) when I tried to run it, the last version worked
fine with the streams terminal. What did you change?
Traceback (most recent call last):
File "res.py", line 16, in ?
os.system("xterm -cr blue -bg black -fg white -C -title streams
-geometry %dx%d+0+%d -e python c51.py" % (largeur,hauteur,pos_vert) )
NameError: name 'largeur' is not defined
--
Your connection failed because: backup tape overwritten with copy of system
manager's favourite CD
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Hum last minute changes are no good. The patch I sent you should do.
The new file I uploaded on the Pyvon site is fixed whatever your screen
resolution is ( 640x480 -> 1600x1280 and over )
Sorry for the trouble
Daniel Matthews wrote:
> <posted & mailed>
>
> Fabien wrote:
>
>
>>http://pyvon.sourceforge.net
>>
>>I have fixed all the bugs that I know of.
>>
>
> [SNIP]
>
> I got this error (below) when I tried to run it, the last version worked
> fine with the streams terminal. What did you change?
>
> Traceback (most recent call last):
> File "res.py", line 16, in ?
> os.system("xterm -cr blue -bg black -fg white -C -title streams
> -geometry %dx%d+0+%d -e python c51.py" % (largeur,hauteur,pos_vert) )
> NameError: name 'largeur' is not defined
>
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
How do you customize colors in xterm. I read the man page and tried
rgb:FF/FF/BA but it does not work the way I want.
Could you give me a line example for xterm ( and while I am at it for
Eterm and Konsole)
Thanks.
Fabien
Fabien wrote:
> http://pyvon.sourceforge.net
>
> I have fixed all the bugs that I know of.
>
> There may be a few left. -> I called that release 0.9.
> It's going to give me some margin before 1.0 if you can find any bugs.
>
> Main features added :
> - Highlights the line in the editor in which there is a problem when POV
> returns an error.
> - Full syntax highlighting is now implemented (even multiline and single
> comments)
> - Fixed about thirty bugs which were still lying around.
>
> It's now the only editor I use for POV with Linux.
>
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Fabien HENON schrieb:
> Hum last minute changes are no good. The patch I sent you should do.
>
> The new file I uploaded on the Pyvon site is fixed whatever your screen
> resolution is ( 640x480 -> 1600x1280 and over )
>
While trying to render I got this message:
/bin/sh: /home/fabien/povray-3.5/povray_athlon: Datei oder Verzeichnis
nicht gefunden
Exception in Tkinter callback
Traceback (most recent call last):
File "/usr/lib/python2.2/lib-tk/Tkinter.py", line 1292, in __call__
return apply(self.func, args)
File "/usr/lib/python2.2/lib-tk/Tkinter.py", line 436, in callit
apply(func, args)
File "c51.py", line 889, in tempo
fd=open("err.txt")
IOError: [Errno 2] No such file or directory: 'err.txt'
-> /home/fabien/povray-3.5/povray_athlon
Maybe no good default povray binary :-)
Regards,
Sebastian H.
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Fabien HENON <fab### [at] caramail com> wrote:
> How do you customize colors in xterm. I read the man page and tried
> rgb:FF/FF/BA but it does not work the way I want.
I don't know if the colors can be customized (without having to compile
xterm), but at least they can be configured with command-line parameters
with aterm, which is a rather good rxvt clone. Worth trying.
--
#macro M(A,N,D,L)plane{-z,-9pigment{mandel L*9translate N color_map{[0rgb x]
[1rgb 9]}scale<D,D*3D>*1e3}rotate y*A*8}#end M(-3<1.206434.28623>70,7)M(
-1<.7438.1795>1,20)M(1<.77595.13699>30,20)M(3<.75923.07145>80,99)// - Warp -
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Fabien HENON wrote:
> How do you customize colors in xterm. I read the man page and tried
> rgb:FF/FF/BA but it does not work the way I want.
>
> Could you give me a line example for xterm ( and while I am at it for
> Eterm and Konsole)
>
> Thanks.
>
> Fabien
>
> Fabien wrote:
> > http://pyvon.sourceforge.net
> >
> > I have fixed all the bugs that I know of.
> >
> > There may be a few left. -> I called that release 0.9.
> > It's going to give me some margin before 1.0 if you can find any bugs.
> >
> > Main features added :
> > - Highlights the line in the editor in which there is a problem when POV
> > returns an error.
> > - Full syntax highlighting is now implemented (even multiline and single
> > comments)
> > - Fixed about thirty bugs which were still lying around.
> >
> > It's now the only editor I use for POV with Linux.
> >
On IRIX 6.5 I use this command: xterm -font screen15 -back black -sl 200
which allows you to specify the background colour. I thin you can use the -fg
color or -cr color flags to change the color of the text.
Hope this helps.
mike
--
*********************************
Michael DiDonato, PhD
The Scripps Research Institute
Department of Molecular Biology
Maildrop MB4
10550 North Torrey Pines Road
La Jolla, CA, 92037
Tel: (858) 784-9261
FAX: (858) 784-2277
http://www.scripps.edu/~didonato
*********************************
Post a reply to this message
Attachments:
Download 'us-ascii' (2 KB)
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Fabien HENON wrote:
> How do you customize colors in xterm. I read the man page and tried
> rgb:FF/FF/BA but it does not work the way I want.
>
> Could you give me a line example for xterm ( and while I am at it for
> Eterm and Konsole)
>
> Thanks.
>
> Fabien
>
> Fabien wrote:
> > http://pyvon.sourceforge.net
> >
> > I have fixed all the bugs that I know of.
> >
> > There may be a few left. -> I called that release 0.9.
> > It's going to give me some margin before 1.0 if you can find any bugs.
> >
> > Main features added :
> > - Highlights the line in the editor in which there is a problem when POV
> > returns an error.
> > - Full syntax highlighting is now implemented (even multiline and single
> > comments)
> > - Fixed about thirty bugs which were still lying around.
> >
> > It's now the only editor I use for POV with Linux.
> >
Actually the -cr flag changes the colour of the cursor only. The -fg flag
changes the colour of the text as well.
Mike
--
*********************************
Michael DiDonato, PhD
The Scripps Research Institute
Department of Molecular Biology
Maildrop MB4
10550 North Torrey Pines Road
La Jolla, CA, 92037
Tel: (858) 784-9261
FAX: (858) 784-2277
http://www.scripps.edu/~didonato
*********************************
Post a reply to this message
Attachments:
Download 'us-ascii' (2 KB)
|
|
| |
| |
|
|
|
|
| |
| |
|
|
I meant that I want different colors than those offered by the terminal
: black, white, yellow...
The best would be to be able to give colors as in POV rgb <0.7,0.7,0.4>
.
Fabien
> Fabien HENON wrote:
>
>> How do you customize colors in xterm. I read the man page and tried
>> rgb:FF/FF/BA but it does not work the way I want.
>>
>> Could you give me a line example for xterm ( and while I am at it
>> for
>> Eterm and Konsole)
>>
>> Thanks.
>>
>> Fabien
>>
>> Fabien wrote:
>> > http://pyvon.sourceforge.net
>> >
>> > I have fixed all the bugs that I know of.
>> >
>> > There may be a few left. -> I called that release 0.9.
>> > It's going to give me some margin before 1.0 if you can find any
>> bugs.
>> >
>> > Main features added :
>> > - Highlights the line in the editor in which there is a problem
>> when POV
>> > returns an error.
>> > - Full syntax highlighting is now implemented (even multiline and
>> single
>> > comments)
>> > - Fixed about thirty bugs which were still lying around.
>> >
>> > It's now the only editor I use for POV with Linux.
>> >
>
> On IRIX 6.5 I use this command: xterm -font screen15 -back black -sl
> 200 which allows you to specify the background colour. I thin you can
> use the -fg color or -cr color flags to change the color of the text.
>
> Hope this helps.
>
> mike
>
>
> --
> *********************************
> Michael DiDonato, PhD
> The Scripps Research Institute
> Department of Molecular Biology
> Maildrop MB4
> 10550 North Torrey Pines Road
> La Jolla, CA, 92037
>
> Tel: (858) 784-9261
> FAX: (858) 784-2277
>
> http://www.scripps.edu/~didonato
> *********************************
>
>
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
You have to tell Pyvon where is the executable.
Use 'Options / povray location'
This path is from the pyvon.ini file taken from my hard drive.
You have to set your path to the POV location
I definitely have to save that pyvon.ini into ~home, not into the directory
where Pyvon is extracted.
For those who already have pyvon.ini, I advise to back it up and restore it
after the extraction of the tgz archive.
I must have disabled the option that checks whether the executable path found
in pyvon.ini exists on the hard drive.
I'll see to that.
Thanks for the comment
Fabien
> Fabien HENON schrieb:
> > Hum last minute changes are no good. The patch I sent you should do.
> >
> > The new file I uploaded on the Pyvon site is fixed whatever your screen
> > resolution is ( 640x480 -> 1600x1280 and over )
> >
>
> While trying to render I got this message:
>
> /bin/sh: /home/fabien/povray-3.5/povray_athlon: Datei oder Verzeichnis
> nicht gefunden
> Exception in Tkinter callback
> Traceback (most recent call last):
> File "/usr/lib/python2.2/lib-tk/Tkinter.py", line 1292, in __call__
> return apply(self.func, args)
> File "/usr/lib/python2.2/lib-tk/Tkinter.py", line 436, in callit
> apply(func, args)
> File "c51.py", line 889, in tempo
> fd=open("err.txt")
> IOError: [Errno 2] No such file or directory: 'err.txt'
>
> -> /home/fabien/povray-3.5/povray_athlon
> Maybe no good default povray binary :-)
>
> Regards,
> Sebastian H.
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
