|
|
|
|
|
|
| |
| |
|
|
|
|
| |
| |
|
|
Hi,
Now the version 0.1.5 is online
see change log at http://qtpoveditor.sf.net
have fun !
Thierry
> "gRRosminet" <pov### [at] les-charlesnet> wrote in message
> news:3fbe06c4$1@news.povray.org...
>
> I've been using the editor for about a week to check it out. The editor
> is excellent. There is a bug which I think I can reproduce. If the save
> button is clicked after a file has been closed, the last file closed
> will be erased and the editor will crash. I was not using the editor in
> KDE, so this might make a difference.
>
> The only other problem is that the entire path to a file is displayed in
> the tab, making the tabs pretty useless at 1024x768 unless a really tiny
> font is used.
>
> The only other problem has nothing to do with your program, but I'll ask
> since I'm assuming you develop with KDE. Your editor font selection uses
> the same list as all of the KDE apps. I, and several others whose
> questions I have seen posted on the Internet, have been unable to add
> installed bitmapped fonts to that menu. Any ideas?
>
> With a 17" monitor, a good font is almost a must for Pov-Ray. I used
> Luxi-Mono when using your editor, which is OK. Courier breaks up at
> nine-point, and there is no visible difference between periods and
> commas with Vera Sans Mono. The font which I have installed and use in
> non-KDE editors is profontwin, which I recommend to anyone who needs a
> very readable, fixed-width font at nine-point on a smallish monitor.
> http://www.tobias-jung.de/seekingprofont/index.html
>
> -Shay
>
>
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
"gRRosminet" <pov### [at] les-charlesnet> wrote in message
news:3fc66cf9$1@news.povray.org...
I could not get the new version to work. In order to compile it, I had
to copy the 'images' folder from the 1.4 download. Once compiled, it
would display a file, but would not render it. The error message
reported that the file could not be found.
Also, the shortened tab names are only shortened when a file is
initially opened. When the file is saved, the tab names revert back to
showing the entire path.
Thank you for all of the hard work.
-Shay
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
> "gRRosminet" <pov### [at] les-charlesnet> wrote in message
> news:3fc66cf9$1@news.povray.org...
>
> I could not get the new version to work. In order to compile it, I had
> to copy the 'images' folder from the 1.4 download.
It seems like I forgot to join the images in the package, hopefully, the
was no changes ... sorry
> Once compiled, it
> would display a file, but would not render it. The error message
> reported that the file could not be found.
>
Could you tell me the absolute path to the file please ? It seems that
povray does not support paths with spaces (even protected) ... I should
do some corrections to avoid that problem, but the file name will ever
be space less.
> Also, the shortened tab names are only shortened when a file is
> initially opened. When the file is saved, the tab names revert back to
> showing the entire path.
It seems that I have forgotten some code
>
> Thank you for all of the hard work.
>
> -Shay
>
>
Thanks for your support
Thierry
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
"gRRosminet" <pov### [at] les-charlesnet> wrote in message
news:3fcc7021@news.povray.org...
|
| Could you tell me the absolute path to the file please ?
/usr/local/share/povray-3.5/scenes/00tower/tower_bridge.pov
|
| It seems that povray does not support paths with spaces
| (even protected) ... I should do some corrections to avoid
| that problem, but the file name will ever
| be space less.
No spaces, and works fine with 1.4. One thing which I might have
forgotten to try is saving the file and then trying to render it. I may
have only tried to open the file and then render it. If I get a chance
tonight, I will recompile 1.5 and post the specific error message here.
-Shay
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
> "gRRosminet" <pov### [at] les-charlesnet> wrote in message
> news:3fcc7021@news.povray.org...
> |
> | Could you tell me the absolute path to the file please ?
>
> /usr/local/share/povray-3.5/scenes/00tower/tower_bridge.pov
>
> |
> | It seems that povray does not support paths with spaces
> | (even protected) ... I should do some corrections to avoid
> | that problem, but the file name will ever
> | be space less.
>
> No spaces, and works fine with 1.4. One thing which I might have
> forgotten to try is saving the file and then trying to render it. I may
> have only tried to open the file and then render it. If I get a chance
> tonight, I will recompile 1.5 and post the specific error message here.
>
> -Shay
>
>
Yes, I have foud the problem. in fact, I try to protect the filename
with \ and finaly povray doesn't understand what it means whereas on
command line the shell translate the arguments into something that pov
prefers .... The bug should be corrected via these few things :
open file 'menu/renderMenu.cpp.h'
go to line 102
replace these lines :
for (uint i = 0 ; i < pathsList.count() ; i++)
{
if (pathsList[i].selected)
{
cmd += " +L";
cmd += secure_filename(pathsList[i].path);
}
}
cmd += " +I";
cmd += secure_filename(activeFileName);
cmd += " +B001 +O";
cmd += secure_filename(activeFileName);
cmd += ".png";
cmd += " +GA";
cmd += RENDERER_FILE;
cmd += QString::number(getpid());
cmd += " ";
cmd += additionnalOptions->text();
with these ones :
for (uint i = 0 ; i < pathsList.count() ; i++)
{
if (pathsList[i].selected)
{
cmd += " +L";
cmd += pathsList[i].path;
}
}
cmd += " +I";
cmd += activeFileName.section('/',-1,-1);
cmd += " +B001 +O";
cmd += activeFileName.section('/',-1,-1);
cmd += ".png";
cmd += " +GA";
cmd += RENDERER_FILE;
cmd += QString::number(getpid());
cmd += " ";
cmd += additionnalOptions->text();
I hope this will be enough
Thierry
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
I said something wrong in the previous post ...
open file 'menu/renderMenu.cpp.h'
go to line 111
replace this lines :
cmd += " +I";
cmd += activeFileName.section('/',-1,-1);
with this one :
cmd += " ";
cmd += activeFileName.section('/',-1,-1);
I hope this will be enough
Thierry
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
"gRRosminet" <pov### [at] les-charlesnet> wrote in message
news:3fccc42f@news.povray.org...
|
| I hope this will be enough
|
The file renders, but there are other problems. The Pov output is not
being displayed, and all entries into the additional options field are
being ignored.
-Shay
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
I'm realy sorry ... the 0.1.5 package is very bad ...
So ... the problem is that I forget that the name of the file we want to
render must be the last parameter ... otherwise the last parameters are
ignored ...
The (final) solution is to move some lines down :
cmd += " ";
cmd += activeFileName.section('/',-1,-1);
must be placed after
cmd += additionnalOptions->text();
I promess to be more conscientious with the next package
Thierry
> "gRRosminet" <pov### [at] les-charlesnet> wrote in message
> news:3fccc42f@news.povray.org...
> |
> | I hope this will be enough
> |
>
> The file renders, but there are other problems. The Pov output is not
> being displayed, and all entries into the additional options field are
> being ignored.
>
> -Shay
>
>
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
"gRRosminet" <pov### [at] les-charlesnet> wrote in message
news:3fce4eb0$1@news.povray.org...
|
| The (final) solution is to move some lines down :
|
This fixed the problem, but I had two crashes. I recorded the terminal
output during the second crash.
QDArray::at: Absolute index 300 out of range
QDArray::at: Absolute index 300 out of range
QDArray::at: Absolute index 300 out of range
QDArray::at: Absolute index 312 out of range
QDArray::at: Absolute index 312 out of range
QDArray::at: Absolute index 312 out of range
QDArray::at: Absolute index 324 out of range
QDArray::at: Absolute index 324 out of range
QDArray::at: Absolute index 324 out of range
QDArray::at: Absolute index 336 out of range
The number of times which each number appeared is from memory and may
not be completely accurate.
-Shay
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |
| |
|
|
> "gRRosminet" <pov### [at] les-charlesnet> wrote in message
> news:3fce4eb0$1@news.povray.org...
> |
> | The (final) solution is to move some lines down :
> |
>
> This fixed the problem, but I had two crashes. I recorded the terminal
> output during the second crash.
>
> QDArray::at: Absolute index 300 out of range
> QDArray::at: Absolute index 300 out of range
> QDArray::at: Absolute index 300 out of range
> QDArray::at: Absolute index 312 out of range
> QDArray::at: Absolute index 312 out of range
> QDArray::at: Absolute index 312 out of range
> QDArray::at: Absolute index 324 out of range
> QDArray::at: Absolute index 324 out of range
> QDArray::at: Absolute index 324 out of range
> QDArray::at: Absolute index 336 out of range
>
> The number of times which each number appeared is from memory and may
> not be completely accurate.
>
> -Shay
>
>
Could you tell me if it was v0.1.5 or 0.2.0 and what did you do to get
this crashes ?
Post a reply to this message
|
|
| |
| |
|
|
|
|
| |