POV-Ray : Newsgroups : povray.off-topic : Interesting interview questions Server Time
4 Sep 2024 17:24:45 EDT (-0400)
  Interesting interview questions (Message 54 to 63 of 63)  
<<< Previous 10 Messages Goto Initial 10 Messages
From: Captain Jack
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 09:41:55
Message: <4b59b933$1@news.povray.org>
"Invisible" <voi### [at] devnull> wrote in message 
news:4b597f2b$1@news.povray.org...
>
> Somebody suggested that by burning data onto a CD-ROM and getting students 
> to cycle to the other side of Cambridge with the CDs in backpacks, you 
> could achieve several GB/s mean transfer rate. Of course, the packet 
> latency would be about 25 minutes each way…

I remember reading about a company that had to send engineering drawings and 
data between shops just at the dawn of modem technology. They investigated 
micro-ficheing the data and use carrier pigeons to transfer it, because of 
the volume of data. I don't know if it's true, but I've always loved that 
story.

--
Jac


Post a reply to this message

From: Captain Jack
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 09:43:07
Message: <4b59b97b$1@news.povray.org>
"scott" <sco### [at] scottcom> wrote in message 
news:4b598c01$1@news.povray.org...
>>
>>  How do you burn data to a DVD-ROM?
>
> You mean you can burn data to a CD-ROM now? :-O

I tried burning a CD once... it'll never replace beer, I can tell you that 
right now.

:-D

--
Jack


Post a reply to this message

From: Invisible
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 09:48:29
Message: <4b59babd$1@news.povray.org>
Captain Jack wrote:

> I remember reading about a company that had to send engineering drawings and 
> data between shops just at the dawn of modem technology. They investigated 
> micro-ficheing the data and use carrier pigeons to transfer it, because of 
> the volume of data. I don't know if it's true, but I've always loved that 
> story.

Oh, I'm sure they *investigated* it. Some PHB somewhere would probably 
think that's a great idea. Whether they ever *implemented* it is another 
matter entirely, of course. ;-)


Post a reply to this message

From: Darren New
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 12:34:48
Message: <4b59e1b8$1@news.povray.org>
Captain Jack wrote:
>> to cycle to the other side of 
> I remember reading 

Obligatory xkcd:
http://xkcd.com/691/

I like the roll-over text.

-- 
Darren New, San Diego CA, USA (PST)
   Forget "focus follows mouse." When do
   I get "focus follows gaze"?


Post a reply to this message

From: Jim Henderson
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 13:53:53
Message: <4b59f441$1@news.povray.org>
On Fri, 22 Jan 2010 04:18:55 -0500, Bill Pragnell wrote:

> Jim Henderson <nos### [at] nospamcom> wrote:
>> But man was it slow compared to the modern Internet.
> 
> Those old-school tubes get more efficient the more data you have to
> send. Say you put a harddrive in the tube, the effective bandwidth would
> be vast compared to even the fastest LAN... ;-D

As long as it doesn't smash into the 'landing pad'. ;-)

>>But it was quite
>> nostalgic. :-)
> 
> Ah, nostalgia. Whatever happened to that?

It ain't what it used to be, that's for sure. :-)

Jim


Post a reply to this message

From: Jim Henderson
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 13:55:37
Message: <4b59f4a9$1@news.povray.org>
On Fri, 22 Jan 2010 05:53:31 -0500, Warp wrote:

>   How do you burn data to a DVD-ROM?

The way I'd do it is produce an ISO and ship it off to be pressed....

Jim


Post a reply to this message

From: Orchid XP v8
Subject: Re: Interesting interview questions
Date: 22 Jan 2010 18:25:42
Message: <4b5a33f6$1@news.povray.org>
Darren New wrote:

> Obligatory xkcd:
> http://xkcd.com/691/
> 
> I like the roll-over text.

...now scroll up a few posts and see that I already did this exact one. ;-)

-- 
http://blog.orphi.me.uk/
http://www.zazzle.com/MathematicalOrchid*


Post a reply to this message

From: Stephen
Subject: Re: Interesting interview questions
Date: 23 Jan 2010 01:45:47
Message: <4b5a9b1b$1@news.povray.org>
Invisible wrote:
> Bill Pragnell wrote:
> 
>> welcome to povray.off-topic.pedantry
> 
> Pedantry? Isn't that a place where you store cheese?

No, it is where you store your feet to keep them fresh.

-- 

Best Regards,
	Stephen


Post a reply to this message

From: Chambers
Subject: Re: Interesting interview questions
Date: 23 Jan 2010 15:59:13
Message: <4b5b6321$1@news.povray.org>
Darren New wrote:
> Warp wrote:
>>   I have hard time parsing that question.
> 
> It *is* messed up. The usual question is something like
> 
> You have a race two miles long. For the first mile, one car goes 60MPH 
> and the other goes 30MPH. How fast does the other car have to go to 
> finish the race at the same time as the one going 60MPH?
> 

In the time it takes the second car to go one mile, the first car 
finishes the race.

...Chambers


Post a reply to this message

From: Darren New
Subject: Re: Interesting interview questions
Date: 23 Jan 2010 16:18:26
Message: <4b5b67a2$1@news.povray.org>
Chambers wrote:
> Darren New wrote:
>> Warp wrote:
>>>   I have hard time parsing that question.
>>
>> It *is* messed up. The usual question is something like
>>
>> You have a race two miles long. For the first mile, one car goes 60MPH 
>> and the other goes 30MPH. How fast does the other car have to go to 
>> finish the race at the same time as the one going 60MPH?
>>
> 
> In the time it takes the second car to go one mile, the first car 
> finishes the race.

That's the trick question. Of course, this one was poorly worded, because I 
said "for the first mile" and I intended that to refer to the faster car. If 
it refers to the slower car, yes, it's a trick question. It shows whether 
you actually think before you answer. :-)

-- 
Darren New, San Diego CA, USA (PST)
   Forget "focus follows mouse." When do
   I get "focus follows gaze"?


Post a reply to this message

<<< Previous 10 Messages Goto Initial 10 Messages

Copyright 2003-2023 Persistence of Vision Raytracer Pty. Ltd.