Jim Henderson <nos### [at] nospamcom> wrote:
> Not a bad idea; I have it sitting in front of my monitor right now, and 
> have used it on my lap even (which was actually quite comfortable) - so 
> maybe something where I could store it under the desk surface would do 
> the trick.

  A friend of mine has had bad experiences about using a tablet directly
on his lap. Namely, his tablet got broken, and the reason might be that he
used it so often on his lap that the bending forces might have broken it.
Some tablets might not have been designed to be used that way, but instead
on a flat surface.

  Maybe use some plywood or whatever on your lap and use the tablet on top
of it, to be safe.

-- 
                                                          - Warp

Post a reply to this message

On Sun, 20 Sep 2009 06:22:25 -0400, Warp wrote:

> Jim Henderson <nos### [at] nospamcom> wrote:
>> Not a bad idea; I have it sitting in front of my monitor right now, and
>> have used it on my lap even (which was actually quite comfortable) - so
>> maybe something where I could store it under the desk surface would do
>> the trick.
> 
>   A friend of mine has had bad experiences about using a tablet directly
> on his lap. Namely, his tablet got broken, and the reason might be that
> he used it so often on his lap that the bending forces might have broken
> it. Some tablets might not have been designed to be used that way, but
> instead on a flat surface.
> 
>   Maybe use some plywood or whatever on your lap and use the tablet on
>   top
> of it, to be safe.

Good thought, I probably wouldn't have thought of that.  I don't apply 
that much pressure to it, but it may not take a lot, and I'd hate to 
break something I paid $300 for....

Jim

Post a reply to this message

On 20 Sep 2009 06:15:14 -0400, Jim Henderson <nos### [at] nospamcom> wrote:

>> Bummer :(
>
>Yeah.  Having done a little research online, looks like the part is about 
>$75 and should take less than an hour to replace, complete with 
>rekeying.  But if the dealership doesn't have the part, I may not be able 
>to drive to the office on Weds (and I need to do that).
>

That's one of the advantage of living in a big city :D

>> I see the problem but can't advise as that is not the sort of thing I'm
>> good at. I am good at saying "you should have listened to me." :-)
>
>Historically I've been quite good at that as well, but I'm trying to 
>translate that skill to a more proactive (and hopefully thus *useful*) 
>place.  The good news is that after one round of e-mails with two of our 
>top execs, I still have a job.  I must've done something right. ;-)
>



>
>Ouch.  Security clearances are almost always a problem, aren't they?
>

No, this is only the second job that I've had to have clearance. Normally I get
the authority I need just by asking. If my security clearance isn't high enough
to be given the knowledge to understand the processes then they should either be
raised or the company should get someone who has the clearance. It is not as if
I would ever work in the Middle East, anyway.

>> Anyway night, night :)
>
>Eventually, 4 AM here now.

Tomorrow's Sunday, no work. :)
-- 

Regards
     Stephen

Post a reply to this message

On 20 Sep 2009 06:16:10 -0400, Jim Henderson <nos### [at] nospamcom> wrote:

>On Sun, 20 Sep 2009 05:42:10 -0400, SharkD wrote:
>
>> Jim Henderson wrote:
>>> The next problem I have to solve is finding a good clear space on my
>>> desk for it.
>> 
>> Better yet, attach it to a hinged arm that you can swing wherever you
>> want it to (and out of the way of the keyboard when needed).
>
>Not a bad idea; I have it sitting in front of my monitor right now, and 
>have used it on my lap even (which was actually quite comfortable) - so 
>maybe something where I could store it under the desk surface would do 
>the trick.
>

I keep my big tablet under my keyboard.
-- 

Regards
     Stephen

Post a reply to this message

On Sun, 20 Sep 2009 12:04:10 +0100, Stephen wrote:

> On 20 Sep 2009 06:15:14 -0400, Jim Henderson <nos### [at] nospamcom> wrote:
> 
>>> Bummer :(
>>
>>Yeah.  Having done a little research online, looks like the part is
>>about $75 and should take less than an hour to replace, complete with
>>rekeying.  But if the dealership doesn't have the part, I may not be
>>able to drive to the office on Weds (and I need to do that).
>>
>>
> That's one of the advantage of living in a big city :D

Indeed.  I might go down to the auto parts store today and see if they 
have what I need and can walk me through the installation.

>>> I see the problem but can't advise as that is not the sort of thing
>>> I'm good at. I am good at saying "you should have listened to me." :-)
>>
>>Historically I've been quite good at that as well, but I'm trying to
>>translate that skill to a more proactive (and hopefully thus *useful*)
>>place.  The good news is that after one round of e-mails with two of our
>>top execs, I still have a job.  I must've done something right. ;-)
>>
>>
> If no one speaks out … :)

Exactly what I thought.

> 
>>Ouch.  Security clearances are almost always a problem, aren't they?
>>
>>
> No, this is only the second job that I've had to have clearance.
> Normally I get the authority I need just by asking. If my security
> clearance isn't high enough to be given the knowledge to understand the
> processes then they should either be raised or the company should get
> someone who has the clearance. It is not as if I would ever work in the
> Middle East, anyway.

Well, yeah, same thing here as well (I had to have a background security 
check before being employed by Novell since we deal with export-
controlled software), but I meant that getting them when needed tends to 
be a problem.  And of course getting turned down can be a severe career 
limiting move, since that shows up in the next background check....

>>> Anyway night, night :)
>>
>>Eventually, 4 AM here now.
> 
> Tomorrow's Sunday, no work. :)

Heh, I wish.  I seem to be saying that a lot today.  Gathering statistics 
and my thoughts for a discussion this coming week.  Finally starting to 
get tired, almost 6 AM now...

Jim

Post a reply to this message

On Sun, 20 Sep 2009 12:05:48 +0100, Stephen wrote:

> On 20 Sep 2009 06:16:10 -0400, Jim Henderson <nos### [at] nospamcom> wrote:
> 
>>On Sun, 20 Sep 2009 05:42:10 -0400, SharkD wrote:
>>
>>> Jim Henderson wrote:
>>>> The next problem I have to solve is finding a good clear space on my
>>>> desk for it.
>>> 
>>> Better yet, attach it to a hinged arm that you can swing wherever you
>>> want it to (and out of the way of the keyboard when needed).
>>
>>Not a bad idea; I have it sitting in front of my monitor right now, and
>>have used it on my lap even (which was actually quite comfortable) - so
>>maybe something where I could store it under the desk surface would do
>>the trick.
>>
>>
> I keep my big tablet under my keyboard.

That would make it difficult to use. ;-)

Jim

Post a reply to this message

On 20 Sep 2009 07:53:40 -0400, Jim Henderson <nos### [at] nospamcom> wrote:


>Indeed.  I might go down to the auto parts store today and see if they 
>have what I need and can walk me through the installation.
>

Sounds like a plan :D

>>>
>> If no one speaks out ? :)
>
>Exactly what I thought.
>

Right!

>Well, yeah, same thing here as well (I had to have a background security 
>check before being employed by Novell since we deal with export-
>controlled software), but I meant that getting them when needed tends to 
>be a problem.  And of course getting turned down can be a severe career 
>limiting move, since that shows up in the next background check....
>

We don't want to get two only semi related things mixed up. Personally I can't
see any reason why I shouldn't get clearance, it's not very high. But it is
talking the SAP security guys into understanding the situation in a way that
doesn't put their backs up. The very tight timeline and fixed price budget is a
concern.

>>>> Anyway night, night :)
>>>
>>>Eventually, 4 AM here now.
>> 
>> Tomorrow's Sunday, no work. :)
>
>Heh, I wish.  I seem to be saying that a lot today.  Gathering statistics 
>and my thoughts for a discussion this coming week.  Finally starting to 
>get tired, almost 6 AM now...
>

One o'clock here. -_-
-- 

Regards
     Stephen

Post a reply to this message

On 20 Sep 2009 07:54:01 -0400, Jim Henderson <nos### [at] nospamcom> wrote:

>> I keep my big tablet under my keyboard.
>
>That would make it difficult to use. ;-)

Mostly I only use a very small area for navigating with the pen instead of a
mouse (about 2" X 3"). If I want to use it properly then I move it out.
Just a thought.
-- 

Regards
     Stephen

Post a reply to this message

Jim Henderson wrote:
> Not a bad idea; I have it sitting in front of my monitor right now, and 
> have used it on my lap even (which was actually quite comfortable) - so 
> maybe something where I could store it under the desk surface would do 
> the trick.
> 
> Jim

Another option is one of those little laptop stands, like these:

http://images.google.com/images?hl=en&source=hp&q=laptop+table&gbv=2&aq=f&oq=&aqi=g2

-Mike

Post a reply to this message

Jim Henderson wrote:
> Nope.  Gotta have it towed to the dealer, probably to replace the 
> ignition switch cylinder.  The car is 10 years old, and things wear out.  

I've never heard of this, unless you've broken off the key in the switch, 
and my dad was an auto mechanic for 30+ years...

In the "is it turned on, is it plugged in" category, do you have a locking 
steering wheel? If so, try turning the wheel a bit. Is the car securely in 
parking gear?  Almost always when I get stuck, it's one of those two things.

-- 
   Darren New, San Diego CA, USA (PST)
   I ordered stamps from Zazzle that read "Place Stamp Here".

Post a reply to this message