POV-Ray : Newsgroups : povray.newusers : Making A Heart Server Time
31 Oct 2024 19:28:59 EDT (-0400)
  Making A Heart (Message 1 to 4 of 4)  
From: Caligula
Subject: Making A Heart
Date: 24 Jun 2007 18:35:01
Message: <web.467e1fd1a4147f1c573be920@news.povray.org>
I've been trying to model a heart-shaped box in POV-Ray, but even though I
have the vague idea that using splines would be a good idea, I have no idea
how. Could anyone give me any tips on that?


Post a reply to this message

From: Mike Williams
Subject: Re: Making A Heart
Date: 24 Jun 2007 23:11:56
Message: <EU7iqDAuFzfGFwK$@econym.demon.co.uk>
Wasn't it Caligula who wrote:
>I've been trying to model a heart-shaped box in POV-Ray, but even though I
>have the vague idea that using splines would be a good idea, I have no idea
>how. Could anyone give me any tips on that?

You might consider isosurfaces. This isosurface happens to be reasonably
fast. Here's one with a rounded top.


#include "functions.inc"

camera { location  <1, 2, -3> look_at <0, 0.2, 0> angle 30}

light_source {<100,200,-100> colour rgb 1}
light_source {<-100,100,-100> colour rgb 0.5}

// heart shaped isosurface function
#declare Bend = 0.5;
#declare Sharpness = 0.8;
#declare heart = function { f_sphere(y-pow(abs(x),Sharpness)*Bend,z*2,x,
0.6) }

#declare boxheight = 0.25;
#declare toproundedness = 0.3;

// sides
isosurface {
  function { heart(x,z,0) }
        max_gradient 2.0
        contained_by{box{<-1,0,-1><1,boxheight,1>}}
        pigment {rgb x}
        finish {phong 1.5 phong_size 50}
}

// rounded top
isosurface {
  function { heart(x,z,y) }
        max_gradient 2.0
        contained_by{sphere {0,1}}
        pigment {rgb x}
        finish {phong 1.5 phong_size 50}
  scale <1,toproundedness,1> 
  translate boxheight*y
}


-- 
Mike Williams
Gentleman of Leisure


Post a reply to this message

From: Leroy
Subject: Re: Making A Heart
Date: 25 Jun 2007 23:37:25
Message: <4680890A.5060509@joplin.com>
Caligula wrote:
> I've been trying to model a heart-shaped box in POV-Ray, but even though I
> have the vague idea that using splines would be a good idea, I have no idea
> how. Could anyone give me any tips on that?
> 
> 

I'd use a prism:
I have a Prism editor at my web site:
  http://leroywhetstone.s5.com/

Here's a not very good example:

#declare Heart=prism{
bezier_spline
-0.1,0.1,24
<0,-1.08>
<0.266667,-0.773333> //___control___
<0.733333,-0.466667> //___control___
<1,0.48>
<1,0.48>
<1.17333,0.893333> //___control___
<0.866667,1.10667> //___control___
<0.493333,1.02667>
<0.493333,1.02667>
<0.186667,0.933333> //___control___
<0.133333,0.72> //___control___
<0,0.546666>
<0,0.546666>
<-0.0666667,0.693333> //___control___
<-0.226667,0.96> //___control___
<-0.56,1.05333>
<-0.56,1.05333>
<-0.853333,1.08> //___control___
<-1.16,0.96> //___control___
<-0.986667,0.52>
<-0.986667,0.52>
<-0.64,-0.493333> //___control___
<-0.28,-0.773333> //___control___
<0,-1.08>
}


Post a reply to this message

From: Alain
Subject: Re: Making A Heart
Date: 26 Jun 2007 20:10:58
Message: <4681ab12@news.povray.org>
Leroy nous apporta ses lumieres en ce 2007/06/25 23:33:
> 
> Caligula wrote:
>> I've been trying to model a heart-shaped box in POV-Ray, but even 
>> though I
>> have the vague idea that using splines would be a good idea, I have no 
>> idea
>> how. Could anyone give me any tips on that?
>>
>>
> 
> I'd use a prism:
> I have a Prism editor at my web site:
>  http://leroywhetstone.s5.com/
> 
> Here's a not very good example:
> 
> #declare Heart=prism{
> bezier_spline
> -0.1,0.1,24
> <0,-1.08>
> <0.266667,-0.773333> //___control___
> <0.733333,-0.466667> //___control___
> <1,0.48>
> <1,0.48>
> <1.17333,0.893333> //___control___
> <0.866667,1.10667> //___control___
> <0.493333,1.02667>
> <0.493333,1.02667>
> <0.186667,0.933333> //___control___
> <0.133333,0.72> //___control___
> <0,0.546666>
> <0,0.546666>
> <-0.0666667,0.693333> //___control___
> <-0.226667,0.96> //___control___
> <-0.56,1.05333>
> <-0.56,1.05333>
> <-0.853333,1.08> //___control___
> <-1.16,0.96> //___control___
> <-0.986667,0.52>
> <-0.986667,0.52>
> <-0.64,-0.493333> //___control___
> <-0.28,-0.773333> //___control___
> <0,-1.08>
> }
> 
The drawback is that you can only have a flat top. BUT, it does render somewhat 
faster. The isosurface solution by Mike offer you a rounded top, with the 
ability of adjusting the roundness to your liking.

-- 
Alain
-------------------------------------------------
BE ALERT!!!!  (The world needs more lerts ...)


Post a reply to this message

Copyright 2003-2023 Persistence of Vision Raytracer Pty. Ltd.