<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
a little failure
<p>don't try and mimmc reality you are gonna fail
<p><img SRC="cid:par### [at] telusplanetnet" height=384 width=512>
<p>see don't even try to get something real like this
<p><img SRC="cid:par### [at] telusplanetnet" height=347 width=467></html>
N A wrote:
> > a little failure> > don't try and mimmc reality you are gonna fail>
You just have to adjust the texture.
You could use the metal textures that come with POV-Ray.
Add in the beginning:
#include "metals.inc"
and use as a texture for example:
texture{T_Chrome_4A}
For the modelling:
The balls look a bit too small for my taste. There's too
much space between them and the inner and outer ring.
Just IMHO.
Marc
--
Marc Schimmler
From: Bob Hughes
Subject: Re: once more i fail
Date: 23 Jun 2000 06:40:50
Message: <39533eb2@news.povray.org>
"N A" <web### [at] telusplanetnet> wrote in message
news:39531774.95DCD4DD@telusplanet.net...
| a little failure
| don't try and mimmc reality you are gonna fail
It's a pretty nice failure though. Textures and ball-bearings need a change
like Marc said. And of course the use of some AA wouldn't hurt. Seems the
outer wheel needs to be thicker and smaller in radius, but definitely needs
those spheres to not be cut into like that. Hardware "failure" as is :-)
Bob
More of a clean shiny texture...
A smoother spline... (if that's what you used for the outer shape,
smooth is nice)
Smaller bearings...
Better placement of the ball bearings... ( they do not touch the inner
ring )
Overall it is a good attempt and a well made proto type...
Don't give up...
You only fail if you stop trying... =)
N A wrote:
> a little failure>> don't try and mimmc reality you are gonna fail>> [Image]>> see don't even try to get something real like this>> [Image]
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
ok i admit it i made them both i wanned to see who i could fool
<p>remember my screwdriver? i dont suck this bad
<p>it's for a product demo
<br>
<blockquote TYPE=CITE><img SRC="cid:par### [at] telusplanetnet"
height=347 width=467></blockquote>
</html>
From: Bill DeWitt
Subject: Re: once more i fail
Date: 23 Jun 2000 14:10:52
Message: <3953a82c$1@news.povray.org>
"N A" <web### [at] telusplanetnet> wrote in message
news:3953AB3F.246AB36F@telusplanet.net...
ok i admit it i made them both i wanned to see who i could fool
I wondered why there wasn't enough jitter in the photograph. The corner
of the wall and floor behind the bearing.
issume it's low isa film heheh
Bill DeWitt wrote:
> "N A" <web### [at] telusplanetnet> wrote in message> news:3953AB3F.246AB36F@telusplanet.net...> ok i admit it i made them both i wanned to see who i could fool>> I wondered why there wasn't enough jitter in the photograph. The corner> of the wall and floor behind the bearing.
N A wrote:
> > ok i admit it i made them both i wanned to see who i could fool> > remember my screwdriver? i dont suck this bad> > it's for a product demo> >
Well done.
--
Marc Schimmler
It looked perfectly real to me. So you've fooled at least one person ;)
I did wonder why it was inside a small box room, but assumed there was a
reason for it.
~Sam
N A wrote:
> ok i admit it i made them both i wanned to see who i could fool>> remember my screwdriver? i dont suck this bad>> it's for a product demo>>>>
net" height=384 width=512>
<p>see don't even try to get something real like this
<p><img SRC="cid:par### [at] telusplanet
